Color Remover

Coloration occurs due to various reasons as organic decomposition products Eg. Fulvic acids or from impurities of minerals such as manganese (Mn) and Iron (Fe).

A reduction is the presence of organic matter shows an evident change in color, pointing the need for managing the level of the organic content. As there is a visible relation between the coloration and the level of organic content, it is a clear indicator showing the need for a color remover. Thus, it becomes an important indicator in managing and controlling industrial processes.

An effective method used in color removing is through the application of chemical coagulant into the water that is subject to coloration. Due to our strong research and analysis, we have all the solutions for color removing depending upon the type of water.

Description

Effluent Colour removing is a product available with WaterEx. This product is a 4th degree polymer compound, prevalently used for removing color in textile and dyeing industry. Even though it is used for removing light colours, it proves to be an effective colour remover in industrial processes as well.

Key Features and Benefits

• ~ A color removing agent, when dosed to the system gives a decreasing Chemical Oxygen Demand (COD).
• ~ This product is prevalently used for dense coloured waste water.
• ~ It can be used in the following industries, dyeing, pigmentation, printing, textile, paper, industry.

Application and Dosage

• ~ The chemical must be diluted 10 to 40 times with water thereon dosing it into the system. Let the solution mix with the water (to be treated).
• ~ Once the circulation is proper, you will be able to see the color or waste floating over the water and the water is clear again.

Note: The indexation of the pH level must be set to 7-8 for optimizing the results.

Handling and Storage

Some safety precautions that must always be followed are:

• ~ Follow the instructions from the material safety data sheet, as wearing splash goggles, lab coats, gloves, boots and vapour respirator while handling with chemicals or being in a factory premise.
• ~ If there are splashes on your skin, immediate rinsing is required with water.
• ~ A splash into the eye, calls for immediate need for medical attention.
• ~ One must not be injected.

WaterEx's Effluent Color Remover must be stored in the very same container as provided by the seller.

Keep the containers in covered, closed, cool, dry place, thus away from heat, flame and direct sunlight.

Packing

WaterEx's Effluent Color Remover is available in 30Kgs and 60Kgs Drums.