Antiscalant & Dispersant

Product No: WEC-111

Are you incapable of cleaning scalants effectively?

WaterEx's polymer and surfactant based product is a ready to use antiscalant and dispersant, that makes cleaning process much easier. One worries about the corrosion on the metal, but WaterEx's product has neutral pH count that prohibits any such ruination.

In detail, the chemical combination of chelation and crystal modification prevents or slows down the process of scaling. Above all, the composition of the WaterEx's antiscalant and dispersant is such that scaling of calcium, magnesium, iron oxide and silica is also effectively cleared.

Either manually dose the cooling tower sump or use dosing pump on a periodic basis. Once dosed these scalants are converted into light weighted granules, thereon their removal with water becomes a bagatelle. Our antiscalant and dispersant can be used for removal of sediment deposits from pipelines, fins, louvers etc.

Description and Use

WEC-111 is an all organic blend of antiscalants and polymeric dispersants that provides exceptional manage over mineral foul ants in industrial evaporative cooling water systems. It incorporates a synergergistic amalgamation of dispersants, threshold inhibitors and crystal distorters to accomplish absolute control over scaling and fouling.

Moreover prevent scales, when used under particular situation, it's not only disperses but also dissolves iron oxide, products of corrosion and helps keep the surfaces clean. It permits superior levels of solid salts in water enabling procedure at high cycles with hard make up water. It is successful in excess of a broad range of pH and water treated with WEC-111 can be safety discharged without and action in the sewage.

Application and Dosage

WEC-111 exhibits ant scaling properties by threshold inhibition, appropriation and sparkler deformation. In amalgamation with explicit burly dispersants included in the creation, it provides inhibiting and dispersing aptitude of all mineral scales, dirt, dust, silt etc. and keeps the heat relocate surfaces spotless for best possible heat transfer surfaces clean for optimum heat shift efficiency. The effectual dose levels depend upon factors like water characteristics, fouling potential, other inhibitors used and other system specifies. It can bear solidity at high levels in the system (even up to 2000 ppm as CaCO2) and should be adequate in most cases.

WEC-111 must be fed continuously to ensure that suggested levels of residuals are maintained at all period. The merchandise ought to be fed neat from the container through equipment using non-corrosive apparatus like PP, PE, PVC or Teflon.

Handling and Storage

• ~ Aqua contact with eyes, flush with ample water and get timely medical notice.
• ~ Gloves and goggles ought to be used wherever suitable.
• ~ WEC-111 containers must be air tight beneath shade and away from straight rays.

Packing

WEC-111 is available in 30 litres and 600 litres HDPE drums.